LeCroy WaveSurfer 400 Series User Manual

4) Press Clear Sweeps
5) After 100 sweeps, Read off the DSO Mean parameter voltage, and record the
measurement in Table 7, column Mean.
 Repeat the test for the other channels, substituting channel controls and input
connector. Record the measurements in Table 7.
 Calculate the Difference ( ∆ ) by subtracting the DMM voltage reading from the
DSO mean voltage reading.
 Record the test result in Table 7, and compare the Difference ( ∆ ) to the
corresponding limit in the test record.
Rev. D Sept 2007 Performance Verification 5-21

LeCroy WaveSurfer 400 Series Specifications

General

Brand	LeCroy
Model	WaveSurfer 400 Series
Category	Test Equipment
Language	English