Need help?Do you have a question about the LeeBoy L150 and is the answer not in the manual?
Details specific exclusions and limitations of the warranty coverage provided.
Lists conditions and parts explicitly excluded from warranty coverage.
Disclaims implied warranties and limits liability for damages.
Contains fluids for flushing and cleaning the pump and system.
Used to light burners for heating; requires caution due to gas and fuel.
Available engines are Honda or Briggs & Stratton, requiring clean gas.
Used for hooking/unhooking unit from truck; secure wheels to prevent rolling.
Adjusts pump pressure; set to minimum for pump longevity.
Location for filling tack tank; ensure splash plate is in place.
Used for heating tack; tank pressure should be 8-10 lbs.
Heat the tack; light with igniter only after ensuring burner valves are off.
Sprays tack; features an on/off ball valve for small areas and edges.
Pumps liquid asphalt from tank to spray wand or bar; must be off for flushing.
Used to retrieve tack from lines and spraybar.
Circulates tack back to tank; must be closed to force flow to spray bars/wand.
Measures tack tank temperature; should not exceed 190 deg. (F).
Allows flush material to flow from flush tank into the pump system.
Allows tack material to flow to the spray wand.
Allows material flow to the spray bar.
Details specific exclusions and limitations of the warranty coverage provided.
Lists conditions and parts explicitly excluded from warranty coverage.
Disclaims implied warranties and limits liability for damages.
Contains fluids for flushing and cleaning the pump and system.
Used to light burners for heating; requires caution due to gas and fuel.
Available engines are Honda or Briggs & Stratton, requiring clean gas.
Used for hooking/unhooking unit from truck; secure wheels to prevent rolling.
Adjusts pump pressure; set to minimum for pump longevity.
Location for filling tack tank; ensure splash plate is in place.
Used for heating tack; tank pressure should be 8-10 lbs.
Heat the tack; light with igniter only after ensuring burner valves are off.
Sprays tack; features an on/off ball valve for small areas and edges.
Pumps liquid asphalt from tank to spray wand or bar; must be off for flushing.
Used to retrieve tack from lines and spraybar.
Circulates tack back to tank; must be closed to force flow to spray bars/wand.
Measures tack tank temperature; should not exceed 190 deg. (F).
Allows flush material to flow from flush tank into the pump system.
Allows tack material to flow to the spray wand.
Allows material flow to the spray bar.
General| Operating Weight | Not Available |
|---|---|
| Hopper Capacity | Not Available |
| Paving Width | Not Available |
| Horsepower | 49 hp |
| Engine Power | 49 hp |
To Next Page
