LEGRAND DX2 Series - Sensor Overview; Supported Managing Products; Sensor Support Guidelines

Sensor Overview
▶ Sensors versus actuators:
A sensor can detect the environmental condion, such as temperature, humidity, and water presence.
An actuator can control a system or mechanism, such as opening and closing a door handle.
▶ Suggested interval between connecons (or disconnecons) of diverse sensor package
connecons:
For proper operaon, wait for 15~30 seconds between each connecon operaon or each
disconnecon operaon of environmental sensor packages.
In This Chapter
Supported Managing Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Sensor Support Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Sensor Comparison. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Supported Managing Products
The following products support environmental sensor packages. For excepons, see Sensor Support
Guidelines (on page 6).
▶
Raritan products:
• PX2•
• PX3•
• PX3TS transfer switch•
•
Branch Circuit Monitor 2 (BCM2), PMC and PMMC
•
• PXC•
• PXO•
• PXE•
• Smart Rack Controller (SRC)•
5