LEGRAND DX2 Series - DX2-D2 C6 Dry Contact Contact Closure Sensor

▶ Details:
• Each dry contact has two terminals that DX2-D2 connects/disconnects from each other similar to a•
relay.
• Inial state aer power up is OFF.•
• If auto-management is enabled, dry contacts will be auto-managed.•
• Dry contact port's LED is lit if this port is in "on" state.•
▶
Channel Assignment:
DX2-D2C6 Dry Contact Contact Closure Sensor
DX2‑D2C6 is a mulple dry contact and contact closure sensor. It has seven channels for both contact
closure sensors and dry contact signal actuators. DX2-D2C6 sensor package provides:
• Two RJ45 connectors - for connecon to the Sensor port of the supported managing device and•
chaining
• Five contact closures•
• One magnec sensor•
• Two dry contacts (max. 48V AC/DC, max. 1A non inducve load)•
• Six DIP switches•
• Five LED•
27