LEGRAND DX2 Series - Page 59

Appendix E Sensor Naming Convenons
The model name of an environmental sensor package consists of sensor family, sensor funcons and
the total number of the specied funcons.
[Family] - [Function_1] [Number_1]
- OR -
[Family] - [Function_1] [Number_1] [Function_2] [Number_2]
• [Family] is DX or DX2.•
• [Number_1] and [Number_2] are integer numbers.•
• [Funcon_1] and [Funcon_2] are abbreviaons represenng diverse funcons.•
Note: Some sensor packages may indicate the main funcon only rather than indicang all funcons in
its name. For example, the name of DX2‑VBR indicates that it contains the vibraon sensor while it does
not indicate the contact closure sensor that it also contains.
Abbreviaons Funcons
AF
Airow sensors
CC or C
Contact closure sensor terminals
D
Dry contact signal terminals for actuators
DH
The port to connect a door handle
DP
Dierenal air pressure sensors
H
Humidity sensors
PD
"Powered" dry contact signal terminals
PIR
Passive infrared occupancy sensor
PS
Parcle/dust sensor
T
Temperature sensors
VBR
Vibraon sensors
WSC or WC
Cable water sensors
WSF
Floor-mounted water sensors
59