The Matrix NENX IP50 PBX provides 4 CO analogue trunks for connection to the XT2 system and the outside
world, an Ethernet port for up to 50 IP extensions (IP-DECT handsets) and 2 analogue extensions for
standard (SLT) desk telephones.
IP-PBX CONNECTIVITY
XT2 MATRIX NENX IP50 CONFIGURATION
The ZXT558 Matrix NENX IP50 with Tynetec Config Rev 6 is designed for operation with XT2 systems.
Any incoming call rings the SLT phone and IP-DECT extensions 151 to 180.
Dial 81 for CO1 (XT2), 82 for CO2 (outside line) and 83 for CO3 (XT2).
This Rev 6 Config has the correct CLI format set for XT2 systems and the internal DHCP Server enabled.
To Next Page
Loading...
