LEGRAND Tynetec Advent XT2 - Specification: Poe Injector

Doc No. FM0814 issue 5 Page 45
31. SPECIFICATION: PoE INJECTOR
PoE Injector
Manufacturer/Model No.
TP-Link TL-POE160S
Tynetec Part No.
ZXT506
Compliance
EMC Approval
2014/30/EU,
LVD Approval
2014/35/EU, ,
Eco-Design Approval
2009/125/EC
Environmental Approval
2011/65/EU & (EU)2015/863
Ethernet
Standards
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
Network Media
100BASE-TX: UTP Category 5, 5e Cable (max 100m)
Network Ports
1 x RJ45 Data in, 1 x RJ45 Data & Power out
Data Rate
10/100/1000Mbps
Electrical
Power Requirement
100-240V AC 50/60Hz
PoE Output Power
30 Watts
Mains Lead
1.2 metres long with BS 1363 moulded non-rewireable 13A UK Plug
Fuse Type/Rating
BS 1362 1” 240V AC 5A
Status LED
AC Power (green)
Mechanical
Colour
Black
Enclosure
Wall or desk mounting, indoor use only
Dimensions
125mm x 60mm x 37mm (WxDxH)
Weight
140 grams
Environmental
Operating Temperature Range
0
o
C to +40
o
C
Operating Humidity
10 to 90% RH, Non-condensing