EN
53
TIME
Select Date & Time in the main menu
Select Time Setting in the submenu
Select the desired display format
(12 Hours, 24 Hours)
Set the time
(Select am or pm for the 12-hour format)
TIME ZONE
Select Date & Time in the main menu
Select Time zone in the submenu
Select your time zone/current location
• The Greenwich Mean Time offset is shown on the left of the
line
• Major cities in the relevant time zones are shown on the right
DAYLIGHT SAVING TIME
Select Date & Time in the main menu
Select Daylight Saving Time in the submenu
Select On or Off.
POWER SAVE MODE (STANDBY MODE)
The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
The device has two power save levels.
– Standard Save mode:
Activation of the stand-by mode after 2/5/10 minutes.
– Automatic LCD panel shutdown (see p. 56)
ACTIVATE/DEACTIVATE FUNCTION
Both functions are activated/deactivated concurrently.
Select Power Save in the main menu
Select Power Save Mode
Select On/Off
STANDARD SAVE MODE
Select Power Save in the main menu
Select Auto Power Off
Select the desired setting
(Off, 2 min, /5 min, /10 min)
Note
The camera can be reactivated from standby mode at any time by
pressing the shutter button or by switching the main switch off and
on again.
Camera default settings
To Next Page
Loading...
