Leica CL - BASIC PICTURE SETTINGS; FILE FORMAT SELECTION; JPG RESOLUTION SETTINGS

EN
58
BASIC PICTURE SETTINGS
PHOTO
FILE FORMAT
Choose the JPG format JPG or the standardized raw data format DNG
(= digital negative). These can be used individually or simultaneous-
ly.
Factory setting: DNG + JPG
 Select Photo File Format in the main menu
 Select the desired format
(DNG, DNG + JPG, JPG)
Notes
• The standardized DNG (Digital Negative) format is generally used
for the storage of raw data.
• When picture data is saved in DNG and in JPG format simultane-
ously, then the camera will use the resolution setting for the JPG
format is used for the JPG file (see next section), i.e. the two files
may have differing resolutions.
• The DNG format always uses the highest resolution (24 MP), no
matter what JPG setting is selected.
• The remaining number of pictures shown in the LCD panel will
not necessarily change after every picture taken. A counter
change depends on the subject; very fine image structures
result in higher data quantities, while homogeneous surfaces
mean less data.
JPG RESOLUTION
The JPG format setting offers 3 image resolution (number of pixels)
options. The following file formats are available: L-J P G (24 MP),
M-JPG (12 MP) and S-JPG (6 MP). You can therefore adjust your
settings to the intended use and available memory card capacity.
 Select JPG resolution in the submenu
 Select the desired resolution
Basic picture settings