CS10/CS15 & GS Sensors, Care and Transport 79
4.3 Cleaning and Drying
Product and acces-
sories
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these may attack the
polymer components.
Damp products Dry the product, the transport container, the foam inserts and the accessories at a
temperature not greater than 40°C/104°F and clean them. Remove the battery cover
and dry the battery compartment. Do not repack until everything is dry. Always close
the transport container when using in the field.
To Next Page
Loading...
