EN
187
Basic camera settings
Time
Setting time and time format
These settings are made in the
Time Setting submenu the same
way as previously described for
Date Setting.
Activating / Deactivating
Auto GPS Time and
Daylight Saving Time
1. In the Date & Time submenu, select the desired item, and
2. the desired setting by pressing the click wheel or the joystick
to the right or inwards.
Notes:
•
Auto GPS Time can only be activated, if the GPS function /
menu item is activated.
• When
Auto GPS Time is activated, the time set on the camera is
continuously updated according to the received
GPS signals.
Consequently,
Time Zone and Daylight Saving Time are
deactivated, and the respective settings are over-ruled.
Setting Time Zone
1. In the Date & Time submenu, select Time Zone, and
2. in the submenu, the desired zone according to the listed cities
and/or time shifts by turning the click wheel or pressing the
joystick up or down.
Note:
Even when no battery is inserted in the camera or the battery is
flat, the date and time settings are maintained by a built-in back-up
battery for about 3 months. However, after that time the date and
time must be set again as described above.
SL_EN.indd 187 16.09.2015 15:04:27
To Next Page
