Leica SL - Memory Card Management

EN
193
Basic camera settings
MEMORY CARD MANAGEMENT
When both of the Leica SL's memory card slots are occupied, you
can select whether the photo image data is stored on both cards
simultaneously or sequentially, i.e. first on one until its capacity
limit is reached, and then on the other.
Setting the function
1. In the menu's
SETUP section, select Storage Backup, and
2. switch the function
On or Off.
On Photo image data is saved on both cards simultaneously
• In the top panel display, this is indicated by
.
Off Photo image data is saved on the card in slot 1 until its
capacity is reached, and then on the card in slot 2.
• In the top panel display, this is indicated by
.
Notes:
• When using applications like Leica Image Shuttle
®
or Adobe
Lightroom
®
and taking photos while the camera is connected to
a computer using a USB cable, the recordings are saved on
– both the card(s) and the computer when
Storage Backup is
set to
On
– only on a computer when Storage Backup is set to Off
• The card capacity display in the top panel reflects the menu
setting: With
On, it is less than with Off (due to simultaneous /
sequential storage).
• Video image data is always stored as described for
Off, i.e.
regardless of the menu setting.
• This menu item can be assigned to the
FAVORITES menu.
SL_EN.indd 193 16.09.2015 15:04:28