Leica SL - Acoustic Signals; Button Function Displays

EN
189
Basic camera settings
ACOUSTIC SIGNALS
With the Leica SL, you can decide whether you want your settings
and some other functions to be acknowledged by an acoustic
signal – two volumes are available – or whether operation of the
camera and actually taking photographs should be predominantly
free of noise.
Setting the function
1. In the menu's
SETUP section, select Acoustic Signal,
2. in the submenu
Volume, and
3. in the corresponding submenu, the desired setting.
Setting the desired signals
1. In the menu's
SETUP section, select Acoustic Signal,
2. in the submenu one of the two options
AF confirmation, and
Acoustic Signals, and
3. in the corresponding submenus, the desired settings.
BUTTON FUNCTION DISPLAYS
You can select whether or not icons indicating the functions of the
four buttons next to the monitor are displayed during recording and
playback modes. See p. 286, 289 for illustrations of the icons.
Setting the function
1. In the menu's
SETUP section, select Display Shortcut Icons,
and
2. switch the function
On or Off.
SL_EN.indd 189 16.09.2015 15:04:27