Leica TM30 Series User Manual

Application Programs - Getting
Started
TPS1200+/TS30/TM30 9
Next step
<Method:> Choicelist Method used to determine the coordinate
system.
IF the application
program
THEN
is to be accessed CONT (F1) accepts the changes and starts the application
program. Refer to the relevant chapters.
is to be configured CONF (F2). Refer to the relevant chapters.
Field Option Description

Leica TM30 Series Specifications

General

Brand	Leica
Model	TM30 Series
Category	Measuring Instruments
Language	English