5.4303.8558.0 -
Operating Instructions 6-19
Install the hoisting eye
1. Remove the black cap from the cover of the machine.
2. Before every use of the hoisting eye, do the necessary safety checks as described in the manual of the
hoisting eye. If there are any abnormalities, do not use the hoisting eye and contact your local Lely
service provider.
3. Turn the hoisting eye into the machine until the red mark on the hoisting eye is not visible anymore.
Only the green marking may still be visible.
Figure 23. Hoisting eye installation
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
