5.4303.8558.0 -
2-2 Safety
Tip
Indicates information that may help the reader, but not hazard related.
2.3 Safety Instructions
YOU are responsible for the SAFE operation and maintenance of your machine. YOU must make sure that
you and anyone else who is going to operate, maintain or work in the vicinity of the machine knows all the
related SAFETY information in this manual.
YOU are the key to safety. Good safety practices protect you and the people around you. Make these
practices a working part of your safety program. Make sure that EVERYONE who operates, maintains or
works near the machine obeys the safety precautions. Do not risk injury or death by ignoring good safety
practices.
• Owners must train operators before they operate the machine. This training must be repeated at least
annually.
• The operator must read, understand and obey all safety and operating instructions in the manual.
• A person who has not read and understood all safety and operating instructions is not permitted to
operate the machine.
• Do not modify the equipment in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment and persons.
• Only use approved spare parts and make sure that they are only installed by authorized technicians.
The hazards in the operating zone and working area pose a risk of fatal
injury to unauthorized persons.
Unauthorized persons who do not satisfy the requirements described
herein are not aware of the hazards in the work area. Unauthorized
persons are therefore at risk of serious or fatal injury.
• Keep unauthorized persons away from the operating zone and work
area.
• If in doubt, approach unauthorized persons and ask them to leave the
operating zone and work area.
• Stop work as long as unauthorized persons are within the operating
zone and work area.
2.3.1 General Safety
• An authorized technician must install the machine and its optional components.
• Read and understand the manual and all safety signs before you connect power supplies to operate,
maintain or adjust the machine.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
