5.4303.8558.0 -
Safety 2-7
2
Warning: Risk of falling or being crushed
Unmanned moving vehicle. Do not sit on the
machine. Keep safe distance.
Warning: Restricted area
Only persons who are authorized and have read
and understood all applicable safety instructions
are permitted to enter the area.
Located at a narrow passage where the machine
moves.
Caution: Unmanned moving vehicles
Only persons who are authorized and have read
and understood all applicable safety instructions
are permitted to enter the area.
Located at the entrance of the farm where the
machine moves.
2.4.3 Installation of Safety Decals
1. Make sure that the installation surface is clean and dry.
2. Make sure that the temperature of the mounting surface is not less than 5 °C (41 °F).
3. Find the correct position for the decal before you remove the backing paper.
4. Remove a small part of the cover paper.
5. Put the decal in the correct position on the installation surface and carefully push the small part of
exposed adhesive surface of the decal onto the installation surface.
6. Slowly remove the cover paper and attach the rest of the decal to the installation surface.
7. Puncture small air pockets in the decal with a pin and use the cover paper to smoothen the decal.
2.4.4 Maintenance of Safety Decals
Safety decals show important and useful information that will help you to safely operate and maintain the
machine.
Obey the instructions below to make sure that all the decals stay in the correct position and condition.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
