5.4303.8558.0 -
Lely Juno 1-1
1 Lely Juno
1.1 The Lely Juno Feed Pusher
The Juno Feed Pusher is a battery-driven vehicle that pushes the forage towards the feed fence of the
barn. This gives the cows better access to more fresh food through the day. The rotating lower part of the
side of the feed pusher pushes the forage against the feed fence while the machine drives along the feed
alley.
The information in this manual is for operators. The operator uses the information to operate the feed
pusher. The operator also uses the information to do maintenance.
The operator must read the operating instructions for daily operation and for the setup of a day planning.
He must also read the maintenance and troubleshooting sections for preventive and basic corrective
maintenance instructions.
The operator should refer to the description and the operation section for background information. The
operator must also read and understand the safety instructions in the section 'Safety'.
1.2 Intended Use
The Juno is designed as an autonomous driving machine to push cattle feed towards the feed fence in a
barn.
The feed pusher has been built exclusively for pushing cattle feed lying on the ground of a barn with a
level concrete floor (= proper use). Usage going beyond that does not constitute proper use. The
manufacturer is not liable for damage resulting from improper use; the operator only bears the risk.
Intended use also implies that the instructions and rules prescribed by the manufacturer are obeyed.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
