5.4303.8558.0 -
2-10 Safety
2.5.8 Barn Door Control (optional)
The barn door control unit works with Android only.
When the machine drives from one barn to another, it communicates with the barn door control unit to
open/close the barn door(s).
Lely is not responsible for the barn door. The customer needs to arrange permission for the barn door
manufacturer to connect the barn door to the Lely barn door control system via the ‘CE questionnaire
barn door supplier’ (see chapter CE Questionnaire Barn Door Supplier).
2.5.9 Shock System (optional)
Electrical hazard.
Risk for electric shock.
Keep away from the bumper during operation of the machine.
The maximum amount of energy the electric pulse on the bumper
transfers is 15 mJ (at 500 R). This does not harm cows or humans.
The shock system meets the standard EN IEC 60335-2-76 for electric fence
energizers.
The shock system makes sure the cows do not block the machine. Cows are deterred from touching the
machine by an electric pulse on the bumper. The power energizer generates the electric pulse on the
bumper. The shock system is on when the machine is in operation. When the machine is out of operation
the shock system is off.
Machine status Shock system status
In operation + machine is driving
On
In operation + an alarm is active
On
In operation + machine is charging Off
In operation + pause button is pushed Off
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
