4.2 Adjust the Ground Pressure
1. Lift the Splendimo to the headland position.
2.
Stop the tractor engine.
Wait until all moving parts have stopped before you do adjustments to
the Splendimo.
3. On the left and right mowers:
1. Remove the locking pin from the arm and the spring holder.
2. Install the locking pin in the applicable hole in the arm and spring
holder.
The top hole gives the lowest ground pressure. The bottom hole gives
the highest ground pressure.
WARNING
Note:
4-2 Test and Adjustment
M-H021.1004EN
To Next Page
Loading...