3.4 Move the Splendimo from the Transport Position to the Working
Position
Make sure there are no persons in the area when you move the Splendimo
to the headland position.
Make
sure the PTO is disengaged before you move the Splendimo to the
working position.
1. Pull the operating cord to release the locking hooks on the hydraulic
rams.
2. Operate the tractor hydraulic system to extend the hydraulic ram until
the Splendimo is in the working position.
Figure 11. Working Position
3.5 Move the Splendimo from the Working Position to the Headland
Position
1. Operate the tractor hydraulic system to lift the Splendimo to the
headland position.
Figure 12. Headland Position Combined Lifting
WARNING
WARNING
Operation 3-5
M-H021.1004EN
To Next Page
Loading...