LELY Splendimo 900 M - Page 6

5.1.3 Maintenance Every 50 Working Hours....................................................................................5-1
5.1.4
Maintenance Every 100 Working Hours..................................................................................5-1
5.1.5 Maintenance Every 250 Working Hours..................................................................................5-1
5.1.6 Maintenance Every 500 Working Hours or 1000 Hectare........................................................5-1
5.1.7 Maintenance Before Prolonged Storage..................................................................................5-1
5.1.8 Maintenance After Prolonged Storage.....................................................................................5-2
5.2 Preventive Maintenance...........................................................................................................5-2
5.2.1 Clean the Splendimo................................................................................................................5-2
5.2.2 Grease the Pivot Points...........................................................................................................5-3
5.2.3 Grease the PTO shaft..............................................................................................................5-4
5.2.4 Grease a Mower Element........................................................................................................5-4
5.2.5 Replace the Gearbox Oil..........................................................................................................5-6
5.2.6 Replace the Drive Element Oil.................................................................................................5-8
5.3 Corrective Maintenance...........................................................................................................5-9
5.3.1 Remove and Install a Mower Knive.........................................................................................5-9
5.3.2 Remove and Install a Mower Disc.........................................................................................5-12
5.3.3 Remove and Install a Mower Disc on a Drive Element..........................................................5-13
5.3.4 Disassemble the Cutter Bar...................................................................................................5-14
5.3.5 Assemble the Cutter Bar........................................................................................................5-16
6. Diagrams and Tables.........................................................................................................................6-1
6.1 Lely Splendimo 900 M Hydraulic Schematic............................................................................6-1
6.2 Lely Splendimo 900 M Electrically Controlled Hydraulic Schematic........................................6-1
6.3 Bolt and Nut Torque Table.......................................................................................................6-2
7. Troubleshooting.................................................................................................................................7-1
8. Specifications.....................................................................................................................................8-1
8.1 Splendimo 900 M Specifications..............................................................................................8-1
vi Table of Contents
M-H021.1004EN