3.
WARNING: Hydraulic oil under pressure may squirt out of the
hydraulic hoses when they are connected and disconnected.
INFORMATION: Ensure that the hydraulic connections and
hydraulic plugs are clean.
Connect hydraulic hoses to the tractor.
n Make certain they are assigned correctly.
Ä
Chapter 12.7.2
‘Hydraulic connections’ on page 80
4. Connect the electric lines to the tractor.
5. Check correct installation and function of the lighting equipment.
6. If necessary, x the control box or operation terminal into position
in the tractor cab.
7. If necessary, connect the lines for the control box or operation
terminal.
8.
Prepare for driving.
n
Ä
‘Preparing for driving’ on page 38
Precondition:
√ Machine is mounted.
√ Lines and hoses are mounted.
1. Lift the machine.
2. Lock the additional tractor control units.
ð
Machine is mounted and ready for driving.
INFORMATION: Further measures are required before
driving on public roads.
Ä
Chapter 5.2 ‘Preparing for road
travel’ on page 39
Example image
Preparing for driving
Commissioning
en-GB | Item no. 17516276 | BA 01/2023-09 38
To Next Page
Loading...
