LENCO DVT-2201 - Page 38

- 38 -
DVD System Setup
Media Center
Audio Setup Page
Press the SETUP button to enter the General setup menu, then use the ◄► direction buttons to
select Audio Setup Page, the screen will display as shown below:
Dolby Digital Setup
Dual Mono
On the menu, Use the ▲▼ direction buttons to
select the desired item. Press the OK button to
enter the item. Press the ◄ button to return.
1. Press the ▲▼ direction buttons to select Dolby
Digital.
2. Press the OK button to enter the setup.
3. Use the ▲▼ direction buttons to select items.
4. Press the OK button to enter the setup. Press
the ◄ button to return.
1. Press the ▲▼ direction buttons to select Dual
Mono.
2. Press the OK button to enter the setup.
3.
Use the ▲▼ direction buttons to select items.
4. Press the OK button again to confirm the
selection and return.
1.
Press the  button to select Media Center.
2. Press the OK button to enter.
3. Use the  button to select DVD, USB,
SD/MMC or MS.
4. Press the ENTER button again to confirm the
selection and return to the previous menu.