icomfort Touch 7−Day Programmable Communicating Thermostat
Page 15
After selecting a time period using either method and press-
ing set, the Cleared alert confirmation" screen (figure 39) ap-
pears.
the alert was cleared and
moved to alert history.
please press ’done’ to
return to the list of
active alerts.
alert description
done
ALERT 1 of 5
Service Alert
Thermostat reports:
Replace Filter 1
Latest Occurrence
09/04/10
04:28 PM
4 Occurrences
press for more
Figure 39. Cleared alert confirmation
Press done to return to the device alert screen (figure 37,
page 14).
Using custom time"
NOTE − A previously set service time can be changed using
the custom time" option.
Use Setting custom time" screen (figure 40) to set an exact
date and time for the reminder to appear. Press in one of the
boxes to highlight it and use the up/down arrows to change
the value in that box. Repeat for all boxes. When desired re-
minder is displayed, press set.
set date and time for next
reminder
10 19 AM
May 10 2010
alert description
cancel
set
ALERT 1 of 5
Service Alert
Thermostat reports:
Replace Filter 1
Latest Occurrence
09/04/10
04:28 PM
4 Occurrences
press for more
Figure 40. Setting custom time
Using remind later"
You may chose remind later and select from Remind later
options" list (see figure 41) or set a custom time as described
earlier (see figure 40).
set time for next reminder
1 day
1 week
1 month
3 months
custom time
alert description
cancelset
select
ALERT 1 of 5
Service Alert
Thermostat reports:
Replace Filter 1
Latest Occurrence
09/04/10
04:28 PM
4 Occurrences
press for more
Figure 41. Remind later options
After selecting a reminder time using the listed options or a
custom time, press set. The Remind later confirmation"
screen will appear (figure 42).
remind later
set for:
6/10/10 10:19AM
alert description
done
ALERT 1 of 5
Service Alert
Thermostat reports:
Replace Filter 1
Latest Occurrence
09/04/10
04:28 PM
4 Occurrences
Figure 42. Remind later confirmation
Press done to return to the device alert screen (figure 37,
page 14).
View cleared alerts
A history of cleared alerts allows the installer to review the
cleared alerts. This information can help diagnose problems.
Use the arrows to select either ALL SYSTEM ALERTS or a
device from the list (figure 44) and press view cleared alerts.
Then, scroll through the alerts using next alert. (See figure
44.) The back button returns to the system devices alerts
screen.
view active
alerts
view cleared
alerts
system devices
Use the arrows to
select a device
alerts diagnostics EXIT
ALL SYSTEM
ALERTS
HP
XP17−036−230−01
5910M12345
Furnace
SLP98UH−
090V36C−01
5910G17546
Figure 43. System devices alerts
If no alert or only one alert is present in the history of cleared
alerts, only the back button appears. If no alerts are present
in the system or device’s history, a message will state that
There are no new alerts that require service. Please press
back."
next alertback
alert description
history
alerts diagnostics EXIT
ALERT 1 of 5
Service Alert
Thermostat reports:
Replace Filter 1
Latest Occurrence
09/04/10
04:28 PM
4 Occurrences
press for more
Figure 44. History display
To Next Page
Loading...
