Lennox V0STAT51P-2 - Page 72

72
Option Category Parameter Option Factory Default
General Function
Settings
Date January 1, 2010
Time 12-hour format
Schedule None
Daylight Saving Time Disabled
Display Conguration Standard Display
Contractor And Controller Information Blank
Error Code Display Updated in real time
Service Options
System Type Heat Recovery
Temperature Unit °F
Setpoint Limit
Min. 62°F
Max. 86°F
Indoor Fan
Cooling Fan ON
Heating Fan ON
AUX/AH.Heater Contact
Auxiliary heat: 3°F
Alternative heat: OFF
Lock No function locked
Room Temperature Sensor Location Controller
Room Temperature Sensor Calibration 0°F
Override Not set
Louver Yes
ERV No
Advanced Information Updated in real time
Firmware and Setting Display rmware information
Reset Settings -
Table 6. Factory Default Settings
Technical Support
1-844-GET-VRF1
(1-844-438-8731)
vrftechsupport@lennoxind.com
www.LennoxVRF.com
Download the app
from the Apple App Store or the Google Play
store.