Cable From To
5 SAS signal cable for front
backplane 2
SAS 0 and SAS 1 connectors on front
backplane 2
C0 and C1 connectors on the 8i RAID
adapter installed in PCIe slot 4
6 Power cable for front backplane 2 Power connector on front backplane
2
Backplane power connector 2 on the
system board
7 SAS signal cable for the rear hot-
swap drive assembly
Signal connector on the rear hot-
swap drive assembly
C0 connector on the 8i RAID adapter
installed in PCIe slot 6
68 ThinkSystem SR650 Setup Guide
To Next Page
Loading...
