Table 1. Server specifications (continued)
Specification
Description
Expansion slots
• Your server supports up to eight PCIe slots in the rear:
– PCIe x16/x8/x8, full-height
– PCIe x16/x16/E*, full-height
– PCIe E*/x16/x16, full-height
– PCIe x16/x16, full-height
– PCIe x8/x8, full-height
– PCIe x16, full-height
Note: “E” is short for “empty”. It means the slot in the three-slot riser card is unavailable.
• Your server supports up to one slot for OCP 3.0 Ethernet adapter
For technical rules for PCIe slots, see “Rear view” on page 39 and “Technical rules for PCIe
slots” on page 148.
Graphics processing
unit (GPU)
Your server supports the following GPUs:
• Low-profile, half-length, double-wide: NVIDIA® Tesla® V100, V100S
• Full-height, full-length, single-wide: NVIDIA Quadro® P620, NVIDIA Tesla T4
For technical rules for GPU, see “Technical rules for GPU” on page 151.
Input/Output (I/O)
features
• Front :
– One VGA connector (optional)
– One USB 3.1 Gen 1 connector and one USB 2.0 connector with XClarity Controller
management
– One external diagnostics connector
– One diagnostics panel or LCD diagnostics panel (optional)
• Rear:
– One VGA connector
– Three USB 3.1 Gen 1 connectors
– One XClarity Controller network connector
– Two or four Ethernet connectors on the OCP 3.0 Ethernet adapter (optional)
Chapter 1. Introduction 7
To Next Page
Loading...
