Step 3. Grasp the handle of the processor and memory expansion tray; then, pull and rotate it upward to
the vertical position. This disengages the expansion tray from the system board.
Step 4. Grasp the handle and slowly lift the expansion tray from the server; then, set it on a flat surface.
Figure 117. Processor and memory expansion tray removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the processor and memory expansion tray
Use this procedure to install the processor and memory expansion tray.
Before installing the processor and memory expansion tray:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 59).
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
To install processor and memory expansion tray, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
Chapter 3. Hardware replacement procedures 123
To Next Page
Loading...
