Install the PCIe expansion tray
Use this procedure to install the PCIe expansion tray.
Before installing a PCIe expansion tray:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 59).
To install the PCIe expansion tray, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
• Youku: http://v.youku.com/v_show/id_XMzMyODU3NTY2NA==.html?spm=a2hzp.8253876.0.0&f=51276390
Step 1. Grasp the handle with one of your hands, with the other hand grasping the PCIe expansion tray lift
point; then, carefully lower the tray into the server. Make sure the four posts on the sides are
inserted into the alignment slots on the chassis.
Figure 141. PCIe expansion tray installation
Chapter 3. Hardware replacement procedures 151
To Next Page
Loading...
