Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
• Youku: http://v.youku.com/v_show/id_XMzMyODU3NTY2NA==.html?spm=a2hzp.8253876.0.0&f=51276390
Figure 143. 4U PCIe riser assembly removal
Table 53. 4U PCIe riser assembly filler
1 4U PCIe riser assembly filler
Step 1. Open the release latch.
Step 2. Rotate the lever to disengage the 4U PCIe riser assembly from the slot.
Step 3. Lift the 4U PCIe riser assembly out of the PCIe expansion tray.
Note: To maintain proper system cooling, if only one 4U PCIe riser assembly is installed, the 4U
PCIe riser assembly filler must be installed to operate the server.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a 4U PCIe riser assembly
Use this procedure to install a 4U PCIe riser assembly.
Chapter 3. Hardware replacement procedures 153
To Next Page
Loading...
