AnyBay backplane + 8-bay backplane
Two processors installed
Two options are available for this combination:
Attention: When installing a AnyBay backplane and a 8-bay backplane, always install the AnyBay backplane
to drive bay 0-7, and the 8-bay backplane to drive bay 8-15.
1. With SATA/SAS RAID adapter (16i)
Figure 38. Cable routing, AnyBay backplane + 8-bay backplane
Table 34. Cables and adapters for routing
1 PCIe switch card 4 SATA/SAS signal cables (720 mm)
2 SATA/SAS RAID adapter (16i) 5 SATA/SAS signal cables (900 mm)
3 NVMe signal cables for PCIe switch card
Chapter 2. Server components 45
To Next Page
Loading...
