Figure 53. Chassis air baffle removal
Table 45. Chassis air baffle release latch
1 Release latches
Step 1. Press the chassis air baffle release latches; then, lift the chassis air baffle out from the server.
Note: For proper cooling and airflow, reinstall the chassis air baffle before you install the server
into the rack. Operating the server with the chassis air baffle removed might damage server
components.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the chassis air baffle
Use this procedure to install the chassis air baffle.
Before installing the chassis air baffle:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 59).
To install the chassis air baffle, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
• Youku: http://v.youku.com/v_show/id_XMzMyODU3NTY2NA==.html?spm=a2hzp.8253876.0.0&f=51276390
66 ThinkSystem SR860 Maintenance Manual
To Next Page
Loading...
