Figure 63. Front VGA assembly removal
Step 4. Slightly slide the Front VGA assembly aside and pull it out from the server.
Figure 64. Front VGA assembly removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front VGA assembly
Use this procedure to install the front VGA assembly.
Before installing the front VGA assembly:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 59).
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
To install the front VGA assembly, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
• Youku: http://v.youku.com/v_show/id_XMzMyODU3NTY2NA==.html?spm=a2hzp.8253876.0.0&f=51276390
Step 1. Remove the fan cage assembly (see “Remove the fan cage assembly” on page 71).
Step 2. Route the cable into the slot.
78
ThinkSystem SR860 Maintenance Manual
To Next Page
Loading...
