Lenze 8230 Series - Page 101

Operation and Software
96 BA8230
03 CONFIGURATION
Reaction OFF Discharge dc link
No discharge
Motpot reset Reset at OFF
No Reset
Lock monitor. Yes
No
Auto Restart Time 0 s
MANUAL control Terminal
Control panel
Fieldbus 1
Fieldbus 2
RS422
MANUAL demand Motpot
Demand :27/:28
Demand :29/:30
Fieldbus 1
Fieldbus 2
RS422
Fixed speed
Technoloy
AUTO control Terminal
Control panel
Fieldbus 1
Fieldbus 2
RS422
AUTO demand Motpot
Demand :27/:28
Demand :29/:30
Fieldbus 1
Fieldbus 2
RS422
Fixed speed
Technology
MAN/AUTO c/cover. At standstill
During operation
Invert: 21/22 No
Yes
Capture mode No
Yes
Direction One
Two
Kinetic back-up Yes
No
RS422: Address 0
RS422: Baudrate 19200 Baud
Parameterset No. 1
2
Protection level 2 Copy Target: Set No. 1
2
Copy Parameter Set Execute func.: Yes
Execute Execute func.: No
Term. ParSet chan. . Disable
Enable
Protection level 2 Puls frequency 3 kHz / 6 kHz
Protection level 2 Transact. Release XXXX
Load Defaults Execute func.: Yes
Execute func: No
Show/Hide Bookmarks