Important notes
Protection of persons
5.1
5.1.1
5.1−1
EDSVF9383V EN 7.1−04/2012
5.1 Important notes
Stop!
The drive controller contains electrostatically sensitive
components.
The personnel must be free of electrostatic charge when carrying
out assembly and service operations.
5.1.1 Protection of persons
Danger!
Before working on the controller, check that no voltage is applied
to the power terminals:
ƒ The power terminals U, V, W, +U
G
, −U
G
, BR1, BR2 and
101 ... 104 remain live for at least five minutes after
disconnecting the mains.
ƒ The power terminals L1, L2, L3, U, V, W, +U
G
, −U
G
, BR1, BR2 and
101 ... 104 remain live when the motor is stopped.
All pluggable terminals must only be connected or disconnected when no
voltage is applied!
Pluggable terminal strips
To Next Page
Loading...
