Lenze 9300 Series - 5.4.8 Wiring of motor temperature monitoring

Basic devices in the power range 110 ... 200 kW
Wiring of motor temperature monitoring
5.4
5.4.8

5.4−8
EDSVF9383V EN 7.1−04/2012
5.4.8 Wiring of motor temperature monitoring
The drive controller features 2 connections for motor temperature
monitoring:
ƒ Terminals T1, T2 for connecting a PTC thermistor or thermal contact
(NC contact).
ƒ Pin X8/5 and X8/8 of the incremental encoder input (X8) for
connecting a KTY thermal sensor.