Lenze 9400

9400 Technology applications | Synchronism with mark synchronisation
Introduction
Application examples
20 L EDS94TA10040xxxx EN 1.1 - 10/2008
3.9.6 Relative synchronism with mark synchronisation and real master
[3-8] Relative synchronism with real master (rail)
n Real master/slave 1 (digital frequency extension module required)
o Slave 2
p Electrical shaft, implemented here via system bus (CAN).
q Register (cycle of guiding angle/guiding angle)
r Sensor for mark synchronisation
i
Slave
d v
d
v
R1
R3
1
3
i
1 3

System bus
v
i
Master/Slave
d v
R22
2


a
2
a
3

