EDS94TA10040xxxx EN 1.1 - 10/2008 L 49
9400 Technology applications | Synchronism with mark synchronisation
Parameter setting & configuration
Brake control
Control/setpoint inputs of the function Signal configuration
Lenze setting Control/setpoint input (Multiplexer parameters)
FALSE Release brake C03165/1
FALSE Activate starting torque 2 C03165/2
FALSE Keep open brake at standstill C03165/3
FALSE Brake status signal C03165/4
FALSE Activate brake test C03165/5
FALSE Grind brake C03165/6
0 % Additional torque C03166
To Next Page
Loading...
