Safety engineering
Device modules
SM301 safety module
1
28
EDS94AYAE EN 6.0
ƒ from SM301 V1.1
Contents Specifications
Test institute TÜV Rheinland Industrie Service GmbH, ASI range
Test report 968/EL 420.03/07
Test fundamentals EN 954−1, EN 60204−1, EN 50178, EN 61800−3, EN 61508 Part 1−7,
EN ISO 13849−1, EN 62061
Object to be examined SM301, type E94AYAE VB1.1x of the 9400 Servo Drives series
Test result The module meets the requirements according to
l EN 954−1, category 3
l EN 61508, SIL 3
l EN ISO 13849−1, PL e
Special conditions The safety instructions in the corresponding user documentation must be
observed.
Place of issue Cologne
Issue date 08.05.2007
ƒ from SM301 V1.2
Contents Specifications
Test institute TÜV Rheinland Industrie Service GmbH, ASI range
Test report 968/EL 420.04/07
Test fundamentals EN 954−1, EN 60204−1, EN 50178, EN 61800−3, EN 61508 Part 1−7,
EN ISO 13849−1, EN 62061
Object to be examined SM301, type E94AYAE of the Servo Drives 9400 series
Test result The module meets the requirements according to
l EN 954−1, category 3
l EN 61508, SIL 3
l EN ISO 13849−1, category 3/PL e
Special conditions The safety instructions in the corresponding user documentation must be
observed.
Place of issue Cologne
Issue date 18.10.2007
To Next Page
Loading...
