Safety engineering
Total index
1
138
EDS94AYAE EN 6.0
SDI:Tolerance threshold (C15342), 76 , 131
Sensors, Overview ..., 11
Service code (C15805), 134
Service code (C15810), 134
Service code (C15821), 135
Service code (C15822), 135
SLI: Amount of position change (C15204), 82 , 128
SLI: Safely lim. increment (C15203), 82 , 128
SLS: Permissible direction of movement (C15333), 73 , 131
SOS: Maximum change in position (C15312), 63 , 129
Special operation
− motion function (C15201), 82 , 127
− stop function (C15200), 82 , 127
Speed
− Safe maximum ..., 68
− safely limited ..., 71
Speed measurement, Safe, 42
Speed n_safe (C15402), 46 , 132
Speed window (n=0) (C15310), 58 , 63 , 65 , 129
speed window (n=0) (C15310), 63 , 129
SS1, SS2: Ramp monitoring (C15315), 65 , 129
SS1, SS2: S−ramp time (C15316), 66 , 129
SS1, SS2: Start offset ramp (C15317), 66 , 129
SS1: Deceleration STO after n=0 (15307), 58 , 128
SS2 mode (C15308), 63 , 129
Stop 1
− ramp monitoring, 64
− safe ..., 56
Stop 2
− ramp monitoring, 64
− safe ..., 60
Stop functions, about ..., 48
Stopping time − SS1, SS2 (C15305), 49 , 58 , 63 , 65 , 128
Stored module ID (C15017), 95 , 120
T
Terms, definitions, 6
Time − RTC parameter setting (C15014), 119
Time − sec. parameter setting (C15015), 119
Time for parameter set creation (C15013), 119
Tolerance of speed comparison (C15411), 47 , 133
Torque, safe torque off, 54
Total index, 142
V
Validity of the documentation, 15
To Previous Page
Loading...
