Lenze ECSEM Series - Page 332

Appendix
Code table
12

332
EDBCSXM064 EN 11.0
IMPORTANTPossible settingsCode
SelectionLenze/
{Appl.}
DesignationNo.
C6001 PosLatchAct 0
Activation:
At touch probe (X6/DI2 = HIGH),
the actual position is saved in
C6000.
 133
0 Not active
1 Wait for rising edge
2 Wait for falling edge
3 Wait for rising or falling edge
C6002 TPReceived 0
Touch Probe (TP) recognised
Read only
0 No TP recognised
1 TP with rising edge recognised
2 TP with falling edge recognised
3 TP with rising or falling edge
recognised
C7901 Customer_
Vers
0 Customer’s version identification
l Can be set by the customer.
0 {1} 99999