Lenze i500 Series

Commissioning
24 Teachware i500 - Application case - DOC 2338864 - DE EN 11.2019
EN
Digital inputs/output
Socket
DO1, DO2
Digital output DO1, DO2 of the inverter i500 (DO2 only i550)
LED yellow
Above DO1, DO2
Function indication: DO1, DO2 = 24 V
Socket
DI1 … DI7
Switchable digital inputs DI1 to DI7 of the inverters i500 (DI6, DI7 only i550 with Application
I/O)
LED green
Above DI1 … DI7
Function indication: DI1 … DI7 = 24 V
Toggle switch
Below DI1 … DI7
Toggle switch position LOW: Input is not active or external sensor is connected
Toggle switch position HIGH: Input is activated
Socket
SIA/B
Functional input (not safe) to control STO = Safe Torque Off (only i550 version with STO)
LED green
Above SIA/B
Function indication for safe torque off (STO)
Toggle switch
Below SIA/B
Toggle switch position LOW: Input is not active or external sensor is connected
Toggle switch position HIGH: Input is activated
Circuit diagram (Connection on the right side to the inverter i500 not free accessible)
Digital input
GND
DI
+24V
GND
4k32 V
R
S
LED green
Digital output
GND
DO
GND
4k32
V
R
LED yellow
Analog input/output
GND
AO2
AO1
10k
R
+UB10
S
GND
10k
R
+UB10
AI1+
AI1-
AI1[%]
AI2[%]
3.6. Connection of external motors
For temporary demonstrations and tests, you can connect externally on the teachware case different
AC motors appropriate to the power class of the inverter (0.25 kW or 0.37 kW, respectively). The
connection is
• For the motor cable via the Speedtec sockets on the front face of the teachware
• For the motor encoder via the switching system IO (digital inputs DI3, DI4).
The maximum permitted motor cable length at the Speedtec plug is 2 m.
 Important note!
Due to the closed construction the teachware has a restricted ventilation and cooling sys-
tem. Long operating with high output power can trigger the temperature monitoring of
the devices.