Lenze i510 protec Series

Open and close the cover
Operang Instrucons i510 protec 9
4.2 Cable entries with shield support
The cable glands are located on the underside of the device.
Rated power
hp
kW
0.5 ... 7.5
0.37 ... 5.5
Ø Cable entry A
in
mm
0.85
21.5
Number of holes 3
0.5 ... 3 hp
0.37 ... 2.2 kW
A
4 ... 7.5 hp
3 ... 5.5 kW
A
Suitable cable glands are e.g. Cable Glands Set Size 2 & 3 (EZAMBHXX022)
and Cable Glands Set Size 4 & 5 (EZAMBHXX023).
Operaon
Cable entry A
with cable gland M20 x 1.5
Max. external cable diameter
in
mm
0.51
13
without cable gland
Max. external cable diameter
in
mm
0.83
21
Also see “EMC-compliant installaon“. 10
5 Open and close the cover
► For wiring purposes, loosen the cover using a screwdriver.
1. Insert the screwdriver into the slot device boom and press.
2. Take o the cover.
► Aer compleng the wiring, close the cover by clipping it in for
ensuring the degree of protecon is maintained.
1.
2.