Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17 38
6 Commissioning
6.5 Going online with »Engineer« via TCI
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8. Select the Ethernet connection which you are using to go online with »STEP7« (the same
Ethernet connection that has been configured in the »HW Konfig«).
In our case this is the Ethernet(1) connection:
9. Confirm the selection with OK.
The connection has been accepted.
To Next Page
Loading...
