Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17 46
8 Process data transfer
8.2 Preconfigured port interconnection of the process data objects (PDO)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2 Preconfigured port interconnection of the process data objects (PDO)
The preconfigured port interconnection of the process data objects is activated by setting standard
device code C00007 = "40: MCI".
It is possible to display the port blocks "LP_MciIn" and "LP_MciOut" as well as the preconfigured
interconnections in the »FB Editor« :
Software manual/ »Engineer« online help for Inverter Drives 8400
Here you'll find some detailed information about the port/function block
interconnection in the »Engineer« and about port blocks.
To Next Page
Loading...
