Lenze PROFIBUS E84AYCPM - Conventions Used

Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17 8
1 About this documentation
1.2 Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This manual uses the following conventions to distinguish between different types of information:
Type of information Writing Examples/notes
Numbers
Decimal separator Point The decimal point is always used.
Example: 1234.56
Hexadecimal 0x[0 ... 9, A ... F] Example: 0x60F4
Binary
• Nibble
In inverted commas
Point
Example: ’100’
Example: ’0110.0100’
Text
Version information Text colour blue All pieces of information that only apply to or from a specific
software version of the inverter are highlighted accordingly
in this documentation.
Example: This function extension is available from software
version V3.0!
Program name » « The Lenze PC software »Engineer«...
Window italics The message window... / The Options dialog box ...
Variable name Setting bEnable to TRUE...
Control element Bold The OK button ... / The Copy command ... / The Properties tab
... / The Name input field ...
Sequence of menu
commands
If several successive commands are required for executing a
function, the individual commands are separated from each
other by an arrow: Select the command File
 Open to...
Hyperlink underlined
Optically highlighted reference to another topic. Can be
activated with a mouse-click in this online documentation.
Symbols
Page reference ( 6) Optically highlighted reference to another page. Can be
activated with a mouse-click in this online documentation.
Step-by-step instructions

Step-by-step instructions are indicated by a pictograph.