Lenze PROFIBUS E84AYCPM - Connection Establishment between Master and Slave

Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17 62
9 Parameter data transfer
9.3 PROFIdrive parameter data channel (DP-V1)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.3.1 Connection establishment between master and slave
A class 1 master can always request parameters from a slave if the slave is in the "Data_Exchange"
state.
In addition to the class 1 master, a class 2 master can establish a communication connection to the
slave:
[9-2] Data communication via the DP-V1 parameter data channel
E94YCPM010
Slave
DPV1-
parameter data channel
Read
Write
Master
class 1
Master
class 2