Lexicon MX300 - Store; System; Bypass; User and Factory Leds

9. Store
Used to store or copy programs to the same or different user memory locations.
10. System
Accesses the System global setup menus.
11. Bypass
Pressing this button bypasses or mutes the currently selected program.
12. User and Factory LEDs
Indicate whether the selected program is User or Factory.
13. Program Number Display
Displays the number of the selected program.
14. Program / Load
Selects factory and user programs. Pressing this knob loads the program manually if
program Auto Load is disabled. When in the Program Screen, press this knob to switch
between factory and user program banks. This eliminates the need to scroll through
100 presets if you’re in the middle of the user presets and you want to go to a preset in
the middle of the factory presets.
15. Power Switch
Turns the MX300 on and off.
5
The Front Panel
MX300