• 800 MHz (1.2 GHz recommended)
• 512 MB RAM (1 GB recommended)
To install the MX-Edit and Audio Units software for Macintosh
®
computers, insert the
provided disc into the CD-ROM drive and double-click on the disc icon when it appears.
Double-click on the MX300.dmg.hqx file to extract and run the installer. Follow the
on-screen prompts to install the software.
The installer sets up the standalone MX-Edit Editor/Librarian application in the
Applications folder and the MX-Edit Audio Unit in the Components folder.
QUICK START
When you first open MX-Edit, you will see the MX-Edit Library on the left side of the
MX-Edit window, with the MX300 icon at the top of the Library. An editor panel for the
current program is also open.
Double-click the MX300 icon to expand the Library, then double-click the Factory or
User icons to see the Factory or User program lists. The Factory list will always be the
same, as Factory programs cannot be changed; the User program list will represent the
programs currently residing in the User program locations in your MX300 hardware.
Double-click a program name to open it in the editor. The program settings are reflect-
ed in the Parameter knobs and buttons in the Program Editor window.
The selected program is now loaded in your MX300. Any changes made in the MX-Edit
Program Editor window will also occur simultaneously on the MX300 hardware.
The MX-Edit Editor/Librarian - Windows
®
and Mac
®
35
MX300
To Next Page
Loading...
